Framed Print > Historic > World War I and II > World War I
Framed Print : Curtiss K-12, V-12 Engine, ca. 1918. Creator: Curtiss Aeroplane and Motor Company
Framed Photos from Heritage Images
Curtiss K-12, V-12 Engine, ca. 1918. Creator: Curtiss Aeroplane and Motor Company
In 1916 Curtiss engineer Charles Kirkham began designing an engine to compete with the Wright Corporations Hispano-Suiza. By late 1917, the prototype K-12 (K for Kirkham) was bench tested. While it met its design objectives of high power, low frontal area, compact size, and low weight, the engine encountered technical difficulties during development. Kirkham left Curtiss in 1919, and Arthur Nutt took over the project, eventually producing the D-12, which became a highly successful racing and military power plant in the 1920s. This engine is manufacturers number 5 out of about 20 built. The K-12 powered the Curtiss Navy 18T Wasp triplane and the Army Curtiss 18B Hornet biplane. In 1919 Curtiss test pilot Roland Rholfs set a new worlds altitude record of 10, 641 m (34, 910 ft) with the 18T
Heritage Images features heritage image collections
Media ID 23877549
© Heritage Art/Heritage Images
Air And Space Museum Aircraft Aviation Curtiss Curtiss Aeroplane And Motor Company Curtiss Glenn Curtiss Glenn H Curtiss Glenn Hammond Engine Flight Glenn Curtiss Glenn H Curtiss Glenn H Curtiss Manufacturing Company Glenn Hammond Curtiss Nasm National Air And Space Museum Propulsion Propulsion Reciprocating Rotary Reciprocating Motion Rotary Engine Air Transport
12"x10" Modern Frame
Step back in time with our vintage Framed Print featuring the Curtiss K-12, V-12 Engine, ca. 1918. This historic image, created by the Curtiss Aeroplane and Motor Company, showcases the groundbreaking innovation of Charles Kirkham's engine design. As the first major competitor to the Wright Corporation's Hispano-Suiza engine, the K-12 marked a significant milestone in aviation history. Bring this piece of aeronautical heritage into your home or office and relive the spirit of early aviation engineering.
10x8 Print in an MDF Wooden Frame with 180 gsm Satin Finish Paper. Glazed using shatter proof thin plexi glass. Frame thickness is 1 inch and depth 0.75 inch. Fluted cardboard backing held with clips. Supplied ready to hang with sawtooth hanger and rubber bumpers. Spot clean with a damp cloth. Packaged foam wrapped in a card.
Contemporary Framed and Mounted Prints - Professionally Made and Ready to Hang
Estimated Image Size (if not cropped) is 25.4cm x 25.4cm (10" x 10")
Estimated Product Size is 30.5cm x 25.4cm (12" x 10")
These are individually made so all sizes are approximate
Artwork printed orientated as per the preview above, with landscape (horizontal) or portrait (vertical) orientation to match the source image.
FEATURES IN THESE COLLECTIONS
> Historic
> World War I and II
> World War I
> Historic
> World War I and II
> Services
> Royal Navy
EDITORS COMMENTS
This print showcases the impressive Curtiss K-12 engine, a remarkable creation by the renowned Curtiss Aeroplane and Motor Company. Developed in 1918 as an ambitious competitor to the Hispano-Suiza engine produced by the Wright Corporation, this particular model is manufacturer's number 5 out of approximately 20 built. Designed with meticulous attention to detail, the K-12 engine boasted exceptional features such as high power output, compact size, low weight, and minimal frontal area. However, its journey towards perfection was not without challenges during its developmental phase. After Charles Kirkham initiated its design process in 1916 and successfully bench tested it by late 1917, technical difficulties arose. Nonetheless, Arthur Nutt took over the project after Kirkham's departure from Curtiss in 1919. Under his guidance and expertise, he refined and transformed the K-12 into what became known as the highly successful D-12 engine. This powerful innovation proved invaluable both on racing circuits and within military applications throughout the vibrant aviation era of the 1920s. The K-12 powered notable aircraft like the Curtiss Navy 18T Wasp triplane and Army Curtiss 18B Hornet biplane. Its capabilities were further demonstrated when test pilot Roland Rholfs set a new world altitude record of an astounding height reaching up to approximately10,641 meters (34,910 feet) with an incredible flight aboard an 18T model in 1919. Preserved within this print lies a testament to Glenn Hammond Curtiss' pioneering spirit that revolutionized air transport during World War I. As part of our educational institution's collection at The National Air and Space Museum (NASM), we celebrate this technological marvel that propelled humanity into new frontiers of flight exploration.
MADE IN THE USA
Safe Shipping with 30 Day Money Back Guarantee
FREE PERSONALISATION*
We are proud to offer a range of customisation features including Personalised Captions, Color Filters and Picture Zoom Tools
SECURE PAYMENTS
We happily accept a wide range of payment options so you can pay for the things you need in the way that is most convenient for you
* Options may vary by product and licensing agreement. Zoomed Pictures can be adjusted in the Cart.