Jigsaw Puzzle > Europe > United Kingdom > England > London > Bridges > Blackfriars Bridge
Jigsaw Puzzle : Intended new bridge over the Thames at Blackfriars, 1862. Creator: Unknown
Jigsaw Puzzles from Heritage Images
Intended new bridge over the Thames at Blackfriars, 1862. Creator: Unknown
Intended new bridge over the Thames at Blackfriars, [London], 1862. Bridge designed by Joseph Cubitt, ...the estimated cost of which is £265, 000. Messrs. Peto and Betts [are] the contractors...It is proposed to construct the foundations by sinking wrought-iron caissons, of the same size as the piers, through the sand and gravel which form the bed of the river and some depth of the London clay beneath. The gravel and clay in these caissons will then be excavated, and the caissons filled in solid with masonry. The four wings of the abutments are so designed as to form bold pedestals...Above high-water mark there will be placed at each end of each of the piers a massive column of red polished granite...Each arch will consist of ribs of wrought iron strongly connected together by cross-bracing, the spandrils of these ribs being filled in with ornamental bracing. The arches for the entire length of the bridge will be surmounted by an ornamental cornice and parapet. The floor of the bridge will consist of plates of wrought iron resting upon the ribs...which will be covered with a layer of concrete, upon which the granite paving will be laid'. From "Illustrated London News", 1862
Heritage Images features heritage image collections
Media ID 35126889
© The Print Collector/Heritage Images
Barge Blackfriars Bridge Blackfryars Bridge City Of London England Civil Engineering Engineering Granite Iron Joseph Cubitt Southwark London England Thames Barge Wrought Iron
Jigsaw Puzzle (1014 Pieces)
Step back in time with our exquisite jigsaw puzzle from Media Storehouse, featuring an enchanting image of the Intended New Bridge over the Thames at Blackfriars in London, as it was designed in 1862. This intricately detailed puzzle, based on an authentic historical photograph from Heritage Images, showcases the visionary bridge design by Joseph Cubitt. Immerse yourself in the rich history of London's architectural past as you piece together this captivating puzzle, perfect for puzzle enthusiasts and history buffs alike. Experience the joy of discovery with every completed section, bringing the intended new bridge to life piece by piece.
Made in the USA, 1014-piece puzzles measure 20" x 30" (50.8 x 76.2 cm). Every puzzle is meticulously printed on glossy photo paper, which has a strong 1.33 mm thickness. Delivered in a black storage cardboard box, these puzzles are both stylish and practical. (Note: puzzles contain small parts and are not suitable for children under 3 years of age.)
Jigsaw Puzzles are an ideal gift for any occasion
Estimated Product Size is 76cm x 50.8cm (29.9" x 20")
These are individually made so all sizes are approximate
Artwork printed orientated as per the preview above, with landscape (horizontal) orientation to match the source image.
FEATURES IN THESE COLLECTIONS
> Animals
> Mammals
> Muridae
> Water Mouse
> Arts
> Landscape paintings
> Waterfall and river artworks
> River artworks
> Europe
> United Kingdom
> England
> London
> Boroughs
> City of London
> Europe
> United Kingdom
> England
> London
> Boroughs
> Southwark
> Europe
> United Kingdom
> England
> London
> Bridges
> Blackfriars Bridge
> Europe
> United Kingdom
> England
> London
> Bridges
> London Bridge
> Europe
> United Kingdom
> England
> London
> Bridges
> Related Images
> Europe
> United Kingdom
> England
> London
> Bridges
> Southwark Bridge
> Europe
> United Kingdom
> England
> London
> River Thames
> Europe
> United Kingdom
> England
> London
> Sights
> New River
EDITORS COMMENTS
This photograph captures the intended new bridge over the Thames at Blackfriars, London, in 1862. Designed by Joseph Cubitt, the bridge was a significant engineering project of its time, with an estimated cost of £265,000. The contractors for the construction were Messrs. Peto and Betts. The bridge's foundations were planned to be built using wrought-iron caissons, which would be sunk through the sand and gravel bed of the river and the London clay beneath. Once the gravel and clay in the caissons were excavated, they would be filled in solid with masonry. The abutments were designed with four wings that would form bold pedestals above high-water mark. At each end of each pier, a massive column of red polished granite was planned to be placed. Each arch would consist of ribs of wrought iron, strongly connected together by cross-bracing, with the spandrils filled in with ornamental bracing. The arches for the entire length of the bridge would be surmounted by an ornamental cornice and parapet. The floor of the bridge would consist of plates of wrought iron resting upon the ribs, which would be covered with a layer of concrete, upon which the granite paving would be laid. This photograph offers a glimpse into the innovative engineering techniques of the time and the grand vision for the new bridge at Blackfriars, which would connect the two banks of the Thames and facilitate the growth of the bustling city of London.
MADE IN THE USA
Safe Shipping with 30 Day Money Back Guarantee
FREE PERSONALISATION*
We are proud to offer a range of customisation features including Personalised Captions, Color Filters and Picture Zoom Tools
FREE COLORIZATION SERVICE
You can choose advanced AI Colorization for this picture at no extra charge!
SECURE PAYMENTS
We happily accept a wide range of payment options so you can pay for the things you need in the way that is most convenient for you
* Options may vary by product and licensing agreement. Zoomed Pictures can be adjusted in the Cart.